如何正确清洁感应自动门? - 企业动态
全国咨询热线

企业动态

当前位置:首页 - 新闻资讯 > 企业动态 >

如何正确清洁感应自动门?

来源: 日期:2020-08-11 发布人:admin
  1、检查自动门电机的综合运转情况,易损部品损耗情况。整机运转性能、调整各种参数到正常状态。
  1. Check the comprehensive operation of the automatic door motor and the loss of vulnerable parts. The operation performance of the whole machine is adjusted to normal state.
  2、维护设备,排除故障。
  2. Maintenance equipment, troubleshooting.
  3、更换滑轮,张紧轮,地轮等易损品部品。
  3. Replace pulley, tension pulley, ground pulley and other vulnerable parts.
  4、给皮带加腊。
  4. Wax the belt.
  5、在机械传动部分要打齿轮油,积尘多的地方要清洁干净,重新把润滑油打好。
  5. Gear oil should be applied to the mechanical transmission part, and the place with more dust should be cleaned, and the lubricating oil should be played well again.
  6、不锈钢外壳不要用腐蚀性的清洁净清洁,不然容易出现锈点,影响美观。
  6. Stainless steel shell should not be cleaned with corrosive cleaning, otherwise rust spots are easy to appear and affect the appearance.
  7、在使用过程中,如果发现门机不移动,并且有嗡嗡声声,请还关掉开关,马上查看自动门是否有异物卡住,排除故障后再恢复供电!
  7. In the process of use, if you find that the door machine does not move and there is a buzzing sound, please turn off the switch, immediately check whether the automatic door is jammed by foreign matters, and then restore the power supply after troubleshooting!
  8、如果出现门体总是出现不断的开,闭的话,马上关掉电源,及时检查感应器及相关电路,并及时更换好损坏的原器件,以免损坏马达电机,造成更大的损失!
  8. If the door is always open and closed, turn off the power immediately, check the inductor and related circuit in time, and replace the damaged original device in time, so as to avoid damaging the motor and causing greater loss!
  9、如果有部分玻璃发生破啐的情况下请关掉马达电机,以免造成左右得重量不平等造成损坏电机马达!
  9. If part of the glass is broken, please turn off the motor, so as to avoid the weight inequality and damage the motor!
  10、长期不使用时,请断掉电源,以防雷击坏马达电机!
  10. When not in use for a long time, please cut off the power supply to prevent the motor from being damaged by lightning strike!
  11、如发现玻璃及配件有松脱现像时,即时进行维修。
  11. If the glass and accessories are found to be loose, repair immediately.
                                济南淋浴隔断
  感应自动门信号的来源在哪里?
  Where is the source of induction automatic door signal?
  感应门的开门信号是触点信号,微波雷达和红外传感器是常用的两种信号源:微波雷达是对物体的位移反响,因而反响速度快,适用于行走速度正常的人员经过的场所,它的特性是一旦在门左近的人员不想出门而静止不动后,雷达便就不会反响,自动门就会封锁,对门机会起到一个维护作用。
  The door opening signal of the induction door is a contact signal. Microwave radar and infrared sensor are two common signal sources. Microwave radar is the response to the displacement of objects, so the response speed is fast. It is suitable for places where people with normal walking speed pass by. Its characteristic is that once the personnel near the door do not want to go out and stay still, the radar will not respond and the automatic door will be blocked, Play a maintenance role on door opportunities.
  红外传感器对物体存在停止反响,不管人员挪动与否,只要处于传感器的扫描范围内,它都会反响即传出触点信号。缺陷是红外传感器的反响速度较慢,适用于有行动缓慢的人员收支的场所。
  The infrared sensor has no response to the object. No matter whether the personnel move or not, as long as it is within the scanning range of the sensor, it will react, that is, the contact signal will be sent out. The defect is that the response speed of infrared sensor is slow, so it is suitable for places with slow moving personnel.
  另外,假如感应门接受触点信号时辰过长,操控器会以为信号输入体系呈现障碍。并且自动平移门假如坚持敞开时辰过长,也会对电气部件发作危害。由于微波雷达和红外传感器并不理解挨近自动门的人能否真要进门,所以有些场所比较倾向于使用按键开关。
  In addition, if the induction gate receives the contact signal for a long time, the controller will think that the signal input system presents obstacles. And automatic translation door if adhere to open for too long, will also be harmful to electrical components. Because microwave radar and infrared sensors do not understand whether people close to the automatic door really want to enter the door, some places prefer to use the key switch.
  按键开关可所以一个触点式的按钮,便利的是所谓肘触开关。肘触开关很经用,它可以用胳膊肘来操作。还有脚踏开关,功用一样,但对防水的请求较高,并且脚踏的力气很大,简单使脚踏开关失效。还有一种带触点开关的拉手,当拉手被推(或在反方向拉)到位时,向门机供应触点信号。
  Key switch can be a contact type button, convenient is the so-called elbow touch switch. Elbow touch switch is very useful. It can be operated by elbow. There are also foot switches, the same function, but the request for waterproof is higher, and the pedal strength is great, simple to make the pedal switch invalid. There is also a handle with contact switch. When the handle is pushed (or pulled in the opposite direction) in place, the contact signal is supplied to the door motor.
  如今的楼宇自控有时会提出一些别的的请求,例如运用电话的某一分线操控开门。要想实现这个请求,只要让信号是无源的触点信号就行。
  Today's building automation sometimes makes some other requests, such as using a branch line of the telephone to open the door. To achieve this request, simply let the signal be a passive contact signal.
 

上一篇:如何选购和设计办公室玻璃隔断?
下一篇:如何选择淋浴隔断?